Taking pride in your ride means you take servicing seriously and rightfully so. You send your machine down unpredictable paths chalked full of elements that will reduce the performance abilities of your motor. That's why you must keep that engine clean and functional with a pre-filter. The Wildcat XX Particle Separator by S&B Filters has your back. Let's check out these perks.
The UTV particle separator mounts directly to your stock intake and only takes about an hour to install. It's totally worth taking that minute to sling wrenches because the SxS part will suck in dirty air, spit it back out, and send clean air to your filter. S&B uses advanced technology, much like military helicopters, to engineer the aftermarket separator, which means your engine will be more efficient with a longer lifespan. Backed by a five-year manufacturer's warranty, you can be confident your Textron part is quality made from a brand you can trust!
Features:
Product dimensions: 20.2" wide x 10.5" high x 10" deep
Duct length of 39"
Clamp diameter of 1.75"
Efficiency rate of 94%
Amp draw of 3.1 amps
Attached directly to the stock intake system
Installation takes approximately 1 hour with no drilling or cutting on your machine required
Warning: This product can expose you to chemicals including carbon black, lead and lead compounds, silica, crystalline, which are known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov