GCL UTV Windshield For Arctic Cat Prowler 700 XT & 1000 XT
2 Piece Windshield With Optional Vents & Hard Coat
GCL UTV Windshield For Arctic Cat Prowler 700 XT & 1000 XT
2 Piece Windshield With Optional Vents & Hard Coat
SSL Secure and
Privacy Guaranteed
SSL Secured
Expert Support
Product Description
One of the first aftermarket accessories enthusiasts get is a UTV front windshield. Why? Because it only takes one ride to realize drive-wind will melt your face and bugs take up residence in your teeth. With an 700 XT Two Piece Windshield by GCL, you can eliminate those discomforts and keep your interior protected from premature wear. What we love about this particular windshield is the convenience. Unlike many of these components, this SxS windshield can easily be removed for airflow or an open cab feel. That's right, there are no restrictions!
GCL cuts and forms the Prowler windshield from Lexan, right here in the States. Lexan is an excellent material choice because it's significantly stronger than acrylic or automotive glass. It's tough as all get out, and rightfully so. There is no telling what you may encounter while trekking through the unpredictable. As stated before, the Arctic Cat front windshield is held into place with thumbscrews and heavy-duty Velcro. So, removing the top or portion is as easy as a twist. There is no need for tools, no need for sweat. Installation takes just a few minutes with zero machine modifications. Get ready to send those bugs a permanent eviction notice and purchase your 1000 XT front windshield today.
Features:
Available Options:
PLEASE READ: Upon receipt of your windshield and prior to removing the protective film
View Cleaning and Care Instructions
GCL cuts and forms the Prowler windshield from Lexan, right here in the States. Lexan is an excellent material choice because it's significantly stronger than acrylic or automotive glass. It's tough as all get out, and rightfully so. There is no telling what you may encounter while trekking through the unpredictable. As stated before, the Arctic Cat front windshield is held into place with thumbscrews and heavy-duty Velcro. So, removing the top or portion is as easy as a twist. There is no need for tools, no need for sweat. Installation takes just a few minutes with zero machine modifications. Get ready to send those bugs a permanent eviction notice and purchase your 1000 XT front windshield today.
Features:
- 1/4 inch thick Lexan
- Quick install Velcro straps
- Can remove just the upper or just the lower windshield for maximum versatility
- Manufactured in Kentucky U.S.A.
Available Options:
- Lower windshield adjustable vents
- MR10 hard coating for upper windshield
PLEASE READ: Upon receipt of your windshield and prior to removing the protective film
- Inspect for any damages, including scratches protruding through the protective film
- Ensure product satisfaction
- Confirm correct fitment
View Cleaning and Care InstructionsFitment
- 2015 Arctic Cat Prowler 1000 XT
- 2016 Arctic Cat Prowler 1000 XT
- 2017 Arctic Cat Prowler 1000 XT
- 2015 Arctic Cat Prowler 1000 XT EPS
- 2017 Arctic Cat Prowler 1000 XT EPS
- 2015 Arctic Cat Prowler 700 XT
- 2016 Arctic Cat Prowler 700 XT
- 2017 Arctic Cat Prowler 700 XT
- 2015 Arctic Cat Prowler 700 XT EPS
- 2017 Arctic Cat Prowler 700 XT EPS
Important Info
- Cannot ship outside the lower 48 states
Customer Reviews
Product Reviews
GCL two piece windshield for 2017 arctic cat HDX 500, March 10, 2021Posted By: peter
I was fairly skeptical about the fit as well as the long term durability of lexan instead of glass. Was not happy to see the box had broken open during shipping, could have done a better job supporting the product within the heavy duty box. Nothing was missing nor damaged so I got lucky there. Install was smooth, instructions mentioned two sets of hands but I had no trouble doing it all myself. Already had a bimini top so wasn't sure how that was going to be layered in and went into it with an open mind assuming I would have to remove and reinstall after choosing the wrong path. Brackets are heavy duty and nice. A rubber washer was included with the luck nut to assemble the two halves of each bracket. Assumed that was to go between the halves and not directly under the locking nut but the instructions never mentioned that. Installed without issue and the bimini top ended up going over everything like I had hoped and it fit fine. The only fit issue was where the bottom half touches the dashboard as the hood can't open all the way now and the locking lever can't hold the hood up like before, could have recessed the bottom section 1/2 inch back and I think it wouldn't interfere. I did get a call from the manufacturer requesting pictures, so essentially this is a custom install to a degree as they said the dash is different on all the models and years and hard to keep track. Sidebybsidestuff was fantastic throughout, I received multiple calls updating me on shipping and delivery status as I happened to order this right before the country was hit with bad weather. Researched the hard coating option separately and ended up spending the extra $100+ on that, rather not have to replace the windshield in short order. This is for a 2017 Arctic Cat HDX 500 which is used for utilitarian needs and not really for trail riding. Thanks
I was fairly skeptical about the fit as well as the long term durability of lexan instead of glass. Was not happy to see the box had broken open during shipping, could have done a better job supporting the product within the heavy duty box. Nothing was missing nor damaged so I got lucky there. Install was smooth, instructions mentioned two sets of hands but I had no trouble doing it all myself. Already had a bimini top so wasn't sure how that was going to be layered in and went into it with an open mind assuming I would have to remove and reinstall after choosing the wrong path. Brackets are heavy duty and nice. A rubber washer was included with the luck nut to assemble the two halves of each bracket. Assumed that was to go between the halves and not directly under the locking nut but the instructions never mentioned that. Installed without issue and the bimini top ended up going over everything like I had hoped and it fit fine. The only fit issue was where the bottom half touches the dashboard as the hood can't open all the way now and the locking lever can't hold the hood up like before, could have recessed the bottom section 1/2 inch back and I think it wouldn't interfere. I did get a call from the manufacturer requesting pictures, so essentially this is a custom install to a degree as they said the dash is different on all the models and years and hard to keep track. Sidebybsidestuff was fantastic throughout, I received multiple calls updating me on shipping and delivery status as I happened to order this right before the country was hit with bad weather. Researched the hard coating option separately and ended up spending the extra $100+ on that, rather not have to replace the windshield in short order. This is for a 2017 Arctic Cat HDX 500 which is used for utilitarian needs and not really for trail riding. Thanks
Click here to review this product
(Reviews are subject to approval)
(Reviews are subject to approval)
Questions & Answers
Warning: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
