72 Inch Denali Snow Plow with Extended UTV Push Tube

Blade:

• 19" scoop
• Leading horizontal supports are formed from a single piece of 11 gauge steel
• Four 7 gauge ribs run the full height of the blade
• Three additional 7 gauge horizontal stabilizers support the deepest point of the blade
• 65 degree attack angle and over center design ensures snow rolls up and is thrown forward
• Replaceable 7 gauge, grade 50 steel wear bar
• Height and angle adjustable skid feet included
• Center mounted plow disperses force of impact to the sturdiest part of the UTV, preventing damage from sudden impact
• Includes 3 year warranty on the plow blade against manufacturer defects

Push Tube:

• Designed to be used with machines with track systems
• Impact resistant reinforced pivot assembly
• Two additional support bars for maximum durability and strength
• Turn system allows for easy blade positioning in different angles to the left or right - 0 degrees. 12.5 degrees and 25 degrees
• Simple detachment systems with the pull of a pin
• Structural tube steel cross bar for added lateral rigidity
• Quick release pins included
• 13.5 inches center to center for plow mount tabs

Optional Rubber Flap Upgrade:

• Stiff rubber flap
• Metal hold down bar
• Installation hardware

Optional Hydroturn:

• Parker hydraulics system with built in relief valve overload protection
• Hydraulic system is completely sealed for life
• Full radius turn in just 5 seconds while driving
• Heavy duty chrome plated 3/4 inch cylinder shafts
• Two bolt installation of hydraulic cylinder and pump
• No modifications necessary
• Wire harness utilizes weatherproof connectors
• Backwards compatible with manual turning system
• Overload protection of 4,000 lbs. of extension force and 3,500 lbs. of retraction force
• Includes 3 year warranty

Optional Plow Markers:
Snow getting high or need to plow close to vehicles or other items? Get the snow plow markers so you can see exactly where the edge of your blade is, letting you have the most control.


Optional Plow Pulley Fairlead Kit:
The Plow Pulley Fairlead Kit is designed specifically to resist wear from the steep angle that occurs between the fairlead and the plow, extending the life of your winch cable. It can be used with either a steel or synthetic cable and is constructed of black powder coated 7 gauge steel. There are two roller heights for different fairlead heights and angles and you'll receive hardware and instructions.

• Standard spool pattern: 3" x 4-7/8"
• Wide spool pattern: 3" x 6.67"

Optional Box Ends:
If you want to keep the snow from rolling out the sides of your Denali snow plow, get the box ends right here. These are 1/4" thick steel and include height and angle adjustable skid foot brackets. All the necessary installation instructions and hardware are included also.


Optional Additional Wearbar:
If you want to keep the edges of your snow plow in top shape the Denali Polyurethane Wearbar is the choice for you. Not only is the wearbar reversible for longer use, but the polyurethane construction outlasts rubber and steel. The wearbar won't cause damage to brick, concrete, curbs and more! The wearbar is the perfect choice to increase productivity and reduce equipment wear.